Recovery / Tow Point for Ford PJ/PK Ranger / Mazda BT50 2007 2011
Recovery / Tow Point for Ford PJ/PK Ranger / Mazda BT50 2007 - 2011. PAIR Heavy Duty Recovery / Tow Point -Pair. The recovery points have been designed to fit Gen1 ranger and BT50 with standard bumper or factory alloy bar. If the vehicle is fitted with an aftermarket bullbar the recovery points may need modifications to fit or may not fit at all. Please check extra pictures in this listing and inspect your vehicle for the driver side chassis bracket if it is welded or bolted. If it is welded the recovery points can be made to fit but you do require cutting the bracket off. A must have for anyone considering any type of off road or remote touring, The factory two points are no better than a tie down point for transport, These Recovery/tow points will allow you to use a Bridel strap to ensure an even tow. Some specifications of these H/D Tow points are.. Made from 10mm Plate Steel. Using SS41 carbon steel plate (Q235). Direct bolt on to your chassis. No cutting or welding required. Option of using a Bridle strap. Powder coated Yellow for Hi visibility. Destruction tested to over 100.4kN (10.23 ton force) EACH. Holes are at 75mm centres. All of the Recovery / Tow points we supply, are suited to a 4.75t Bow Shackle that we can also supply seperatly, With the 4.75t shackle pin able to fit through the point, giving a greater range of mobility for the shackle during a recovery situation. For most 4wd clubs, it is, or should be, a pre requiste to ensure your vehicle is fitted with recovery points front and rear, these are a great way of meeting those requirements. We are not responsible for these payments and do not undervalue invoices as this is illegal. A signature is required for all deliveries. Some images may contain accessories, equipment or parts that are not included in this listing to provide a clearer understanding of the product. These items are not included in the sale. In the unlikely event of a problem we will always do our utmost to rectify your issue. We are flexible and helpful, and simply ask that you are polite and honest so we can help you. Please check extra pictures in this listing and inspect your vehicle for the driver side chassis bracket if it is welded or bolted If it is welded the recovery points can be made to fit but you do require cutting the bracket off. WLL 5000KG ea A must have for anyone considering any type of off road or remote touring, The factory two points are no better than a tie down point for transport, These Recovery/tow point. We have a secure checkout system for all payments. Direct Deposit your amount into our account over the counter at your local National Australia Bank. Please Note: We DO NOT accept Paymate. Details of the carrier and tracking information will be provided after your goods have been dispatched. Please ensure the address you enter in the checkout is correct.
We are not liable or responsible if you have not updated your details, and your item is sent to an old address. Pick-ups are possible from Warragul Victoria by appointment. It is the sole responsibility of the Purchaser to ascertain whether products comply with local laws.
In some cases the products are intended for Off road use only. ROAD RUNNER OFFROAD is a proudly Australian owned and operated business. Our team are highly experienced in all aspects of 4x4. We pride ourselves on aligning with quality suppliers & products. We trial and test many of our products on competition cars, racing under extreme conditions to ensure our products will stand up to the test of time. Road Runner Offroad will accept any of our products for return if there is a fault with the product or the customer is unhappy with the performance of the item within a set time period. The original copy of the invoice must be provided to Road Runner Offroad. Where Do Customers Return Items? Road Runner Offroad will not be held liable for any damage caused to a vehicle from products supplied by Road Runner Offroad. It is up to the Person fitting the products to make sure the parts do work correctly and are fitted correctly and are the correct parts prior to fitting. T's & C's. All item prices include GST. All pictures displayed in our auctions are for illustration purposes only. All descriptions are provided in the best of our knowledge. While all care is taken, any errors or omissions in the item details is unintentional. The item "Recovery / Tow Point for Ford PJ/PK Ranger / Mazda BT50 2007 2011" is in sale since Thursday, March 23, 2017. This item is in the category "Vehicle Parts & Accessories\Car & Truck Parts & Accessories\Exterior Parts & Accessories\Other Exterior Parts & Accessories". The seller is "roadrunneroffroad4x4" and is located in Buln Buln. This item can be shipped worldwide.
- Brand: Roadsafe
- Manufacturer Part Number: RP-RAN01
- MPN: Does not apply