The increased performance is achieved by the; Chrome Vanadium Diaphragm for maximum durability. ER2 grooved pressure plate patented technology for greater torque capacity and increased heat dispersion. Spheroidal Graphite (SG) Iron pressure plate with a yield strength 300% higher than standard castings. Dual fiction clutch plate with low wear, high coefficient of friction aramid buttons which increase the torque capacity and reduces fade. This clutch kit includes; High capacity ER2 SG iron cover assembly Dual friction (Aramid/organic) clutch disc Concentric Slave Cylinder (CSC) Align tool Spigot bearing Wooden transport crate.The peak torque capacity for this kit is 782Nm however we recommend applying a 1.5 safety factor when selecting the correct clutch system for you vehicle. Please refer to the vehicle compatibility table to determine if this kit is right for your vehicle. If you are unsure, please. Contact our Customer Service Team. With your vehicle details, including REGISTRATION NUMBER, and one of our team members will get back to you within 24hours. What is the difference between Dual Mass Replacement and Dual Mass Flywheel? As vehicles have become lighter and more powerful the problem of NVH (Noise, Vibration and Harshness) has increased. In particular, the torsional vibration present in many automotive drivelines can be the source of gear rattle noise. Manual transmissions can produce gear rattle noise when the gears impact on each other when what is known as "mesh backlash" occurs. A solution to the problem of gear rattle noise has been to install Dual Mass Flywheels (DMF). These flywheels act as a filter that isolates the engines rotational irregularities and torsional vibrations from the driveline. As Dual Mass Flywheels are a tuned system and are matched to the engine torque curve, engine resonant characteristics and vehicle loads, it is important that when replacing a Dual Mass Flywheel with a solid flywheel or Dual Mass Replacement (DMR) the system has been engineered to the performance specifications of each specific vehicle.
A DMR clutch kit is designed to provide the damping effect not from the flywheel but rather via the use of a wide angularity clutch disc. Why would I need an upgraded clutch like the Mantic or 4Terrain system? There could be many reasons why you might need an upgraded clutch such as.Increased vehicle torque from standard specification. Upgrading the clutch system to suit your vehicle and your driving style is critical to ensure your clutch doesn't fail. The Mantic and 4Terrain range is engineered to handle these extreme conditions.
Check out the range to find the right product for you. EAN: 4005108896421 OE Numbers: ALVADI: AL11973817 FORD: 1717548 FORD: 1717549 FORD: 1731712 FORD: 5229596 FORD: 5229597 FORD: AB39 7540 BA FORD: AB39 7540 BC FORD: AB39 7540 CA FORD: AB39 7540 CB FORD: BK31 7540 BB MAZDA: U201-16-490 MAZDA: U201-16-490A SACHS: 3000 950 733 TRIPLE FIVE: 1 427 G03 00 TRIPLE FIVE: 1 427 G03 03 TRIPLE FIVE: 1 427 G03 04 TRIPLE FIVE: 1 427 G03 07 TRIPLE FIVE: 1 627 G03 06 TRIPLE FIVE: L-01427-0G03-00 TRIPLE FIVE: L-01427-0G03-03 TRIPLE FIVE: L-01427-0G03-04 TRIPLE FIVE: L-01427-0G03-07 Ford Ranger 2.2 Ltr I/C TDI, P4AT, 110kw PX, 6 Speed, 9/11 on Ford Ranger 3.2 Ltr I/C TDI, P5AT, 147kw PX, 6 Speed, 9/11 on Ford Ranger 3.2 Ltr I/C TDI, P5AT, 147kw Cab Chassis PX, 6 Speed, 3/14 on Mazda BT-50 2.2 Ltr, P4AT UP0YD 1/11 on Mazda BT-50 3.2 Ltr I/C TDI, P5AT, 147kw UPOYF, 6 Speed, 11/11 on. 480d x 230h x 400w. The item "Ford Ranger PX 2.2 Ltr TDi P4AT 09/11-ON 4Terrain Heavy Duty Clutch Kit" is in sale since Friday, November 1, 2019. This item is in the category "Vehicle Parts & Accessories\Car Parts\Transmission & Drivetrain\Complete Clutch Kits".The seller is "dmrclutch" and is located in Wansford. This item can be shipped to all countries in Europe.