Heavy Duty Ranger

Fabtech Heavy Duty 3.5 Ball Joint UCA System With Rear Shock 19-20 Ford Ranger

Fabtech Heavy Duty 3.5 Ball Joint UCA System With Rear Shock 19-20 Ford Ranger

Fabtech Heavy Duty 3.5 Ball Joint UCA System With Rear Shock 19-20 Ford Ranger

Fabtech Heavy Duty 3.5 Ball Joint UCA System W/ Rear Shock 19-20 Ford Ranger. This quality 2019 Ford Ranger Upper Control Arm system is perfect for owners looking to increase ride height to run slightly larger tires than factory. The system will provide additional wheel travel with no suspension bind at full droop.

Lift is accomplished with steel spacers that utilize the factory Coilover shocks for a stock like ride. Fabtechs Upper Control Arms address the geometry of the front suspension with the new ride height for proper align ability. Heavy duty ball joints allow for extended suspension travel to eliminate binding. The system has been designed for proper CV axle angle and plunge thus eliminating the need to reposition the front differential. Rear lift comes from 1.5 blocks and u-bolts.

Value priced system with Fabtech quality. Increased ground clearance for offroad. Tubular UCA design with urethane bushings for quiet ride. Extended range upper ball joints allow for increased travel. Suspension can be restored to stock.

Your item that you are returning must be brand new and not EVER installed or used. You can not return a used item. Every return will be inspected to make sure it is brand new and complete. Once we give you that number we will provide a return address as well. The item "Fabtech Heavy Duty 3.5 Ball Joint UCA System With Rear Shock 19-20 Ford Ranger" is in sale since Thursday, October 8, 2020.

This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lift Kits & Parts". The seller is "theaftermarketshop" and is located in Pittston, Pennsylvania. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

  • Lift Height: 3.5" Front
  • Adjustable: No
  • Manufacturer Part Number: K2322
  • Part Type: Suspension Lift Kit
  • Included Hardware: Mounting Hardware
  • Kit or Single Part: Kit
  • OE Spec or Performance/Custom: Performance/Custom
  • Years 2: 19 20 Fabtech Front Leveling Kit
  • Years 1: 2019 2020 Ford Ranger Fabtech Level Kit
  • Compare: ReadyLift Skyjaker Rough Country Leveling Kit
  • Placement on Vehicle: Left
  • Other Part Number: 2.5 Inch Leveling Kit Ready Lift
  • Brand: Fabtech
  • Warranty: Lifetime


Fabtech Heavy Duty 3.5 Ball Joint UCA System With Rear Shock 19-20 Ford Ranger